四轴切卷机 JC-1300

性能特点：

1．主机传动部分：采用AC马达搭配变频器作为切卷材料传动，加减速稳定快速。
2．控制单元：使用可程序控制，同轴中可设定多种尺寸自动转换切割。
3．操作面板部分：操作接口采用LCD触控屏10寸，可直接在屏幕上设定各种切卷条件及监控运转状况。
4．电机控制系统：控制系统为PLC可程式控制器，同轴中可设定多种尺寸，切割时可根据设定好的尺寸及数量自动调整切割宽度。
5．切卷定位系统：使用三菱伺服马达控制，高精度滚珠螺杄进行尺寸定位及使用线性滑轨承载刀座定位动作精确平顺。
6．进刀定位系统：使用三菱伺服马达控制进刀方式，可拟人化做三段式速度进刀切卷。提高效率并得到品质。
7．圆刀角度调整：使用三菱伺服马达计算圆刀角度转向，因应不同材料做不同角度变化（角度调整范围±8°）接当切割平面不佳时，可直变换切割角度。可减少换刀次数，提高生产效率。
8．自动换卷装置：使用气缸驱动定位齿利用活动花键进行传动保证换卷快速精；同时可以作到不停机换卷，节约停机上下料的停机时间，提高生产效率。
9．快速换轴装置：本机器有三种切割轴可供选用，采用快速换轴方式，因应不同材料需求。

1. main drive part: AC motor and frequency converter are used to drive the material, and acceleration and deceleration are stable and fast
2. central control unit: programmable central control, which can automatically convert and cut various sizes in the coaxial line
3. operation panel part: the operation interface adopts LCD touch screen 10 inches, which can directly set various cutting conditions and monitor
operation status on the screen
4. motor control system: the central control system is PLC programmable controller, and a variety of dimensions can be set in the coaxial line. The
cutting width can be adjusted automatically according to the set size and quantity.
5. cutting and positioning system: using MITSUBISHI servo motor control, high precision ball screw for size positioning and use of linear sliding rail
bearing knife seat: positioning movement is accurate and smooth.
6. feed positioning system: using MITSUBISHI servo motor to control the feed way, it can be humanized to do three stage speed feed cutting Improve
efficiency and get the best quality.
7. round knife angle adjustment: using MITSUBISHI servo motor to calculate the angle steering of the circular knife, because the different materials
should be changed in different angles(angle adjustment range of 8 degrees), when the cutting plane is not good, it can be straight. Change the cutting
angle. It can reduce the number of changing the knife and improve the production efficiency.
8. automatic winding device: the use of cylinder drive positioning teeth to use the movable spline to drive, ensure the rapid and accurate volume change,
at the same time, can do not stop the machine to change the volume, save the downtime of downtime. Improve production efficiency.
9. quick shaft change device: This machine has three cutting axes to choose from, and adopts quick shaft changing mode to meet different material
requirements

适用范围：

适用于 BOPP／PVC／PE透明胶带／纹纸／双面胶带／牛皮纸胶带等之分切。

It is suitable for BOPP/PVC/PE/transparent tape/transparent tape/textured paper/ double-sided tape/ kraft paper.

The tapes are cut and cut.

技术参数：

机器宽度	Machine Width	1.3M 1.6M
切卷直径	Max．Cutting O．D	150mm
切割管芯外径	Cutting Core O．D	1"-3"
最小切卷宽度	Min．Cutting Width	1mm
圆刀直径	Diameter of Circular Blade	Φ180mm